Commercial Woven Ground Cover
Woven Ground Cover is an effective product for commercial growers. Proven to eliminate nearly all sunlight, Woven Ground Cover works wonders for grass and weed control. The blue lines have been provided to help maintain alignment for containers and overlaps. It is lightweight for easy installation. Do NOT cut with scissors as it can cause unraveling. Below are several common uses.
**Cutting may cause unraveling or split edges.
- Weed Barrier
- Extend Growing Season (Soil Warmer)
- Soil Stabilization
- Blackout Cloth
Commercial Landscape Fabric
Remove existing debris and weeds. For existing beds, unroll the fabric and cut an X where each plant fits. Gently work the fabric down to the plant base and snug the cut flaps to the stem. For larger plants, slit the fabric from the edge to the X and slide fabric around the stem. For new beds, uncool the fabric and cut an X where each hole is to be dug, and plant through. Overlap seams by at least 6 inches.
For retaining walls and drainage, temporarily fasten one edge of the Landscape Fabric overlapping the top of the wall. The middle of the fabric should lay loosely at the wall base. Then make a “U” shaped envelope with the fabric. Fill with drainage aggregate, bringing the loose edge of the fabric up to the top of the wall. Overlap the first edge by one foot minimum. This will help prevent any silt from contaminating the drain or leaching through the wall.
For soil separation, remove debris from area, lay down fabric overlapping edges by a 6″ minimum, and cover with layer of aggregate.
*Commercial Landscape Fabric must be covered with at least 3 inches of mulch or aggregate to guard against degradation.